🗺️ Fishery setup

Your water on the map – sectors, facilities and its own page

Outline your lake, split it into sectors, mark everything on the bank and open a page that anglers will find. Everything else – bookings, prices, catch approval – is built on this map.

Draw your water exactly as it is

Start with the outline of your lake: place points and drag them along the real bank until the shape on the map matches what anglers see when they arrive. Then split the water into areas – just draw a line between two points. If the layout changes, you can join areas back together.

If your water is already in BeAngler, you don't start from a blank screen: the outline is already on the map and the first sector appears by itself, so the page is usable from day one. Fine details are easier on a big screen. And if you don't want to draw at all, tap “Send plan to support” and the sectors will be marked out for you.

Sectors with the names and colours anglers know

Sectors are what you let and the places anglers talk about: “Peg 7”, “Island”, “North Bank”. Each sector has its own name and colour on the map, so the plan on your water's page looks just like the signs on your banks.

Everything is tied to sectors: bookings, prices, catches and statistics. So set them up properly once and the rest just works: a booking shows the sector, a catch from that spot comes to you for approval, and the statistics show which sectors really produce fish.

Facilities where they really are

You can mark 15 kinds of facilities: toilet, shower, water tap, bins, canteen, barbecue, cabin, reception, gazebo, parking, jetty, platform, gate, Wi-Fi and first aid. Each has a name, a description and a number, a pin on the map and, if you like, a link to a sector.

To avoid typing the same thing ten times, describe a typical sector once and apply that set wherever it fits. An angler choosing between two sectors sees straight away which one has a platform and parking nearby. And you get fewer phone calls asking about it.

Rules and contacts in one place

Write your rules with headings, lists and bold for the important bits – the things that get people asked to leave: barbless hooks, unhooking mats, no keepnets, no braid. The rules sit on your water's page, so nobody can say they never saw them.

Names, phone numbers and e-mail appear on the page once you confirm the water is yours. Until then there are no contacts – so nobody ends up ringing the wrong person about someone else's water.

You decide who sees your water

Your water can be visible only to you, to the BeAngler community or to everyone. While only you can see it, it is your draft, and you can open it up step by step. To show it to everyone, you need to confirm the water is yours: upload documents and talk to our moderators right in the app.

Documents are kept for only 30 days after the check. Your contacts appear on the page only after confirmation, so anglers know the phone number really belongs to the water.

A page for your water that people find on Google

Your water gets its own short link and a page in 10 languages: map, sectors, facilities, rules and catches. People find it on Google like any other website. An angler looking for somewhere to fish in your area lands on a page you run, not on an old forum thread.

You can share the page on social media, print it as a QR code at the gate or link to it from your own website. You update it in the same app you use to run the water – no separate website to look after.

Currency – set once

Choose your water's currency before you set the first price. Once a price exists, the currency cannot be changed – so last month's bookings and today's are always in the same money.

Anglers from abroad see an approximate amount in their own currency when booking, while your prices, payments and totals stay in yours.

Why set up your water in BeAngler

Everything in one place

You draw the map, sectors and facilities once, and bookings, prices, catches and statistics all rely on them. No separate spreadsheet to keep copying things into.

Anglers find you

A checked page in 10 languages with its own link works like a website for your water – people find it on Google and it is easy to share.

Help when you need it

Don't fancy drawing the map? Send your plan to support and the sectors will be marked out for you.

Everything starts with the map

Everything a fishery owner uses in BeAngler – bookings, prices, signing anglers in at the gate, catch approval, statistics – rests on one thing: an accurate plan of your water. That is why setup starts with the map. You outline the lake, split it into areas, mark out the sectors you actually let and put the facilities where they stand on the bank. After that every booking shows a real place, every price belongs to a real sector and every catch can be traced to the sector where it was caught.

Below is how to do it step by step. If you want the big picture first, start with the overview of BeAngler for fishery owners. If you are an angler looking for somewhere to fish, the waters page explains what you will find there.

Outline, areas and sectors

First the outline of the water: you place points and drag them until the shape matches the bank. Then the areas – a bay, the channel by the island, the deep end: you split the water with a line between two points or join two areas into one. And finally the sectors – what anglers book. Each one has a name and a colour, so “Peg 12” on the map is the same “Peg 12” painted on the sign by the water.

Many waters are already in BeAngler. If yours is one of them, the outline is already on the map and the first sector appears by itself – you just fine-tune it. Small details are easier on a big screen. And if you don't want to draw at all, tap “Send plan to support”: send a sketch or a photo of your plan and the sectors will be marked out for you.

Facilities anglers ask about

Half the calls a fishery gets are about facilities: is there parking by the sector, is there a shower, where do I get water, is there a toilet on the far bank? In BeAngler you can mark 15 kinds: toilet, shower, water tap, bins, canteen, barbecue, cabin, reception, gazebo, parking, jetty, platform, gate, Wi-Fi and first aid. Each has a name, a description and a number, a pin on the map and, if you like, a link to a sector. You can describe a typical sector once and apply that set wherever it fits.

Facilities affect the price too. A sector's price can be made up of the facilities linked to it – handy when a cabin, a platform and a parking space are let together. More on the bookings page.

Rules and contacts

Rules are written with headings and lists and sit on your water's page next to the map. Anglers read them before booking, and your bailiff on the bank can simply point to the same text.

Contacts work differently from most directories. Names, phone numbers and e-mail appear only once you have confirmed the water is yours. It doesn't take long: you upload documents and message our moderators right in the app. Documents are kept for 30 days after the check and then deleted. So when an angler sees a phone number on a checked water, they know they are calling the right place.

Who sees your water

There are three options. Only you – while you set everything up. The community – BeAngler anglers can see the water. Everyone – anyone can find the page, and for that you need to confirm the water is yours. You can stay in draft as long as you like: the map, sectors and facilities all work while you get ready.

Your water's page in 10 languages

Once your water is open to everyone, it gets its own short link – like drinkstone-lake – and a page in 10 languages: English, Ukrainian, Polish, German, Czech, Hungarian, Romanian, Spanish, French and Italian. The page shows the map, sectors, facilities, rules and recent catches, and people find it on Google. For many small fisheries it becomes the best website they have, and it is updated from the same app. You can see what other waters' pages look like in the BeAngler waters directory.

Currency and where to start

Choose your water's currency before the first price: once a price exists, the currency cannot be changed, so bookings, payments and totals are always in the same money. Anglers from abroad see an approximate amount in their own currency when booking.

A sensible order for a new water: outline and areas, sectors, facilities, rules, currency, then prices and bookings. Once the map is ready, everything else falls into place – bookings and the gate, stocking and catch approval, and staff, jobs and money. It is all part of the Lakekeeper add-on; prices and the trial are on the pricing page.

Frequently asked questions

Do I have to draw the lake from scratch?

No, not if your water is already in BeAngler: the outline is already on the map and the first sector appears by itself. You can also tap “Send plan to support” and the sectors will be marked out for you.

What can I mark on the map?

Fifteen kinds of facilities: toilet, shower, water tap, bins, canteen, barbecue, cabin, reception, gazebo, parking, jetty, platform, gate, Wi-Fi and first aid. Each has a name, a description, a number, a pin on the map and, if you like, a link to a sector.

Why do I have to confirm the water is mine?

Showing the water to everyone and publishing contacts is only possible after confirmation. That way anglers know the page and phone number really belong to the water. You upload documents and talk to moderators in the app; documents are kept for 30 days after the check.

Can I change the currency later?

No. The currency cannot be changed after the first price, so choose it in advance.

Which languages will my water's page be in?

10 languages: English, Ukrainian, Polish, German, Czech, Hungarian, Romanian, Spanish, French and Italian.

Put your water on the map

Draw your lake once – and bookings, stocking and your staff's work will all follow the same plan.

Google PlayApp Store